Produktai skirti 2 t (14)

alphalith Hyperflow 2035 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

alphalith Hyperflow 2035 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

High-performance superplasticizer for medium-slump, high-slump and self-compacting concrete (SCC) with high early-strength and good slump retention for concrete precast applications. Very strong increase of workability and/or reduction of w/c-ratio; high early-strength development; good slump retention.
Eduard ALU 4020 Platformos Priekaba be Statybos 4,06 x 2,00 m 2,7 t AKCIJA

Eduard ALU 4020 Platformos Priekaba be Statybos 4,06 x 2,00 m 2,7 t AKCIJA

EDUARD- Tandem-HOCHLADER-Anhänger im Innenmaß 406 x 200 cm, sehr stabile Zurrösen, Achsen unter der Ladefläche = geringe Gesamtbreite + große nutzbare Innenbreite ! Typ 4020 ZGG 2700 kg Nutzlast 2200 kg Leergewicht 500 kg auflaufgebremst stabiles AUTOMATIK-Stützrad Tandemachse mit verbesserter Laufruhe klapp- und abnehmbare ALU-Bordwände ! Ladehöhe ca. 72 cm ( Bild zeigt Ladehöhe 63 cm mit Aufpreis 200,-- inkl. MwSt.) V-Deichsel sehr stabile , versenkte Anbindeösen im Kasten phenolharzgetränkter Siebdruckboden 13-poliger-Stecker + Sicherheitsbeleuchtung + Reflektoren Werksgarantie ! alle Preise inkl. Kfz-Papieren, ausführlicher Bedienungsan-leitung und Transportkosten bis Wittlich; keine versteckten Mehrkosten
alphalith Hyperflow 2030 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

alphalith Hyperflow 2030 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

High-performance superplasticizer for medium slump and high slump concrete with good slump retention and very high early strength for precast application. Very strong increase of workability and/or reduction of w/c-ratio; very strong plasticizing effect even with high amounts of fines; high increase of early strength.
alphalith 2 (BV) alphalith 3 (BV) - Betono plastifikatorius pagal EN 934-2, T.2

alphalith 2 (BV) alphalith 3 (BV) - Betono plastifikatorius pagal EN 934-2, T.2

Quality concrete of any grade and consistency range, concrete with special characteristics (e.g. water impermeable concrete), pumped concrete, material cost optimization for production of low cost quality concrete. High increase of consistency and/or w/c-reduction, gives homogeneous concrete with good workability.
alphalith Hyperflow 4035 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

alphalith Hyperflow 4035 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

High-performance superplasticizer of the latest generation for concrete precast elements with highest early-strength made from medium slump, high slump or self-compacting concrete (SCC). Very strong increase of workability and/or reduction of w/c-ratio; very high early-strength development; moderate slump retention.
alphalith Hyperflow 2035 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

alphalith Hyperflow 2035 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

High-performance superplasticizer for medium-slump, high-slump and self-compacting concrete (SCC) with high early-strength for concrete precast applications. Very strong increase of workability and/or reduction of w/c-ratio; high early-strength development.
alphalith Porex FL (BV) - Betono superplastifikatorius pagal EN 934-2, T.2

alphalith Porex FL (BV) - Betono superplastifikatorius pagal EN 934-2, T.2

Manufacture of nearly poreless concrete components, In particular with washed, blasted, polished, tumbled or acidified surfaces, such as panels, steps, troughs, components for street furniture, concrete with high exposed concrete quality, strongly pigmented concrete mixes, concrete with a tendency for intensified pore and foam formation on the fill-in side. Improved exposed concrete quality, increased resistance against damaging environmental influences, reduced tendency of efflorescence, lower soiling tendency.
alphalith Hyperflow 2030 (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

alphalith Hyperflow 2030 (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

High-performance superplasticizer for medium slump and high slump concrete with good slump retention and very high early strength for precast applications. Very strong increase of workability and/or reduction of w/c-ratio; very strong plasticizing effect even with high amounts of fines; high increase of early strength.
alphalith Hyperflow 2025 (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

alphalith Hyperflow 2025 (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

High-performance superplasticizer for medium slump and high slump concrete for precast applications. Very strong increase of workability and/or reduction of w/c-ratio; fast plasticizing action for short mixing times; good surface finish, high early strength development.
alphalith Hyperflow 6020 VE (FM) - Superplastifikatorius pagal EN 934-2, T.3.1,3.2

alphalith Hyperflow 6020 VE (FM) - Superplastifikatorius pagal EN 934-2, T.3.1,3.2

Self-compacting concrete (SCC), concrete in slump class F2-F6, concrete precast, ready-mix concrete, concrete with very low w/c values and high high slump, prestressed concrete. Special superplasticizers for high exposed concrete quality, with good initial plasticizing action, slump retention and high early strength development at the same time.
alphalith Hyperflow 2025 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

alphalith Hyperflow 2025 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

High-performance superplasticizer for medium slump and high slump concrete with good slump retention for precast and ready-mix concrete. Very strong increase of workability and/or reduction of w/c-ratio; good slump etention; high early strength development.
alphalith Hyperflow 3000 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

alphalith Hyperflow 3000 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

High-performance superplasticizer for medium-slump, high-slump and self-compacting concrete (SCC) with high early-strength for concrete precast applications. Very strong increase of workability and/or reduction of w/c-ratio; high early-strength development; good slump retention.
alphalith Hyperflow 2030 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

alphalith Hyperflow 2030 LS (FM) - Betono superplastifikatorius pagal EN 934-2, T. 3.1,3.2

High-performance superplasticizer for medium slump and high slump concrete with good slump retention and very high early strength for precast application. Very strong increase of workability and/or reduction of w/c-ratio; very strong plasticizing effect even with high amounts of fines; high increase of early strength.
alphalith Hyperflow 3035 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

alphalith Hyperflow 3035 (FM) - Betono superplastifikatorius pagal EN 934-2, T.3.1,3.2

High-performance superplasticizer of the latest generation for medium slump, high slump and selfcompacting concrete (SCC) with high early strength and good slump retention, low concrete viscosity, low stickiness. Very strong increase of workability and/or reduction of w/c-ratio; high early-strength development; good slump retention; easy to trowel-smooth concrete surface.